Extremely soft material is used for the soft pad surface. If the soft pad surface is rubbed harshly with a dry cloth, it could result in the surface being damaged and leaving white scratch marks.
1. Wipe the soiled area with a soft cloth soaked in a mild detergent (approx. 5%) diluted with water.
2. Wipe off the remaining detergent using a cloth soaked in clean water and wrung out well.
Plastic Part Maintenance
Active Driving Display Maintenance (Some models)Mazda 6 Owners Manual: Camshaft position (cmp) sensor inspection
Caution
When foreign material such as an iron chip is on the CMP sensor,
it can cause abnormal output from the sensor because of flux turbulence and
adversely affect the engine control. Be sure there is no foreign material on
the CMP sensor when replacing.
Note
Perform the follow ...
Mazda 6 Owners Manual: Front door trim removal/installation
1. Disconnect the negative battery cable.
2. Open the cap using a small screwdriver, then remove the screw.
3. Remove the inner handle cover.
4. Remove the inner garnish.
5. Remove the cover, then remove screw A.
6. Remove the lens cover, then remove screw B.
7. Disengage clips A from the ...