Mazda 6 Owners Manual: Spare Tire and Tool Storage
Spare tire and tools are stored in the locations illustrated in the diagram.
Flat Tire
...
Jack
To remove the jack
1. Lift the trunk mat.
2. Remove the pocket.
3. Turn the wing bolt and jack screw counterclockwise.
To secure the jack
1. Insert the wing bolt into the jack with the jack ...
Other materials:
Mazda 6 Owners Manual: Pcm configuration
1. Connect the WDS to DLC-2.
2. Set up the WDS (including the vehicle recognition.)
3. Select Module programming.
4. Select Programmable module installation.
5. Select PCM and perform procedures according to directions on the WDS
screen.
Note
If PCM CONFIGURATION is successful, the PCM ...
Mazda 6 Owners Manual: Transaxle fluid temperature (tft) sensor removal/installation
Warning
When the transaxle and ATF are hot, they can badly burn. Turn off
the engine and wait until they are cool before replacing the ATF.
1. Remove the oil pan. (See CONTROL VALVE BODY REMOVAL.)
2. Disconnect the TFT sensor connector.
3. Remove the TFT sensor.
4. Install a TFT senso ...