Mazda 6 Service Manual: Dtc c1194, c1198, c1210, c1214, c1242, c1246, c1250, c1254, c1400, c1410, c1957, c1958
Diagnostic procedure
Dtc c1186, c1266
Caution
When attaching the tester lead to the DSC HU/CM connector the SST
(49 G066 004) must be used.
Diagnostic procedure
...
Dtc c1280, c1730, c1951, c1952, c1959
Caution
When attaching the tester lead to the DSC HU/CM connector the SST
(49 G066 004) must be used.
Diagnostic procedure
...
Other materials:
Mazda 6 Service Manual: Purge solenoid valve inspection
Airflow Inspection
Note
Perform the following test only when directed.
1. Disconnect the negative battery cable.
2. Remove the purge solenoid valve. (See PURGE SOLENOID VALVE
REMOVAL/INSTALLATION.)
3. Inspect airflow between the ports under the following conditions.
If not as specifi ...
Mazda 6 Service Manual: Steering gear and linkage removal/installation
Caution
Performing the following procedures without first removing the ABS
wheel-speed sensor may possibly cause an open circuit in the harness if it
is pulled by mistake. Before performing the following procedures, remove the
ABS wheel-speed sensor (axle side) and fix it to an appropri ...