Mazda 6 Service Manual: Clutch release cylinder removal/installation
1. Remove the under cover.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
Clutch release cylinder disassembly/assembly
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
...
Other materials:
Mazda 6 Service Manual: Oil control valve (ocv) inspection
L3
Coil Resistance Inspection
1. Disconnect the negative battery cable.
2. Disconnect the oil control valve connector.
3. Measure the resistance between terminals A and B using an ohmmeter.
If not as specified, replace the oil control valve.
Specification
6.9-7.9 ohms
4. Connect ...
Mazda 6 Service Manual: Wheel hub, steering knuckle pre-inspection
Wheel Bearing Play Inspection
1. Position a dial indicator against the wheel hub.
2. Push and pull the wheel hub by hand in the axial direction and measure the
wheel bearing play.
Maximum wheel bearing play
0.05 mm {0.002 in}
3. If the bearing play exceeds the specification, replace and tig ...