Mazda 6 Owners Manual: Troubleshooting
Mazda Bluetooth® Hands-Free Customer Service
If you have any problems with Bluetooth®, contact our toll-free customer service center.
- U.S.A. Phone: 800-430-0153 (Toll-free) Web: www.MazdaUSA.com/bluetooth
- Canada Phone: 800-430-0153 (Toll-free) Web: www.mazdahandsfree.ca
- Mexico Center of Attention to Client (CAC) Phone: 01-800-01-MAZDA (Toll-free) Web: www.mazdamexico.com.mx
Bluetooth® Device pairing, connection problems
How to Use Stitcher™ Radio
What is Stitcher™ Radio?
Stitcher™*1 radio is an application which can be used to listen to Internet radio
or stream podcasts.
Recommended content is automatically selected by registering cont ...
Other materials:
Mazda 6 Owners Manual: Rear side seat belt removal/installation
Caution
The ELR has a spring that will unwind if the retractor's cover is
removed. The spring cannot be rewound by hand. If this occurs, the ELR will
not work properly. Therefore, do not disassemble the retractor.
4SD
1. Fold the rear seat back.
2. Remove the rear side seats.
3. Remo ...
Mazda 6 Owners Manual: Abs (abs/tcs) hu/cm system inspection
System Inspection
Preparation
1. Verify that the battery is fully charged. With the ignition switch on,
verify that the ABS and BRAKE system warning lights goes out after 2.4
seconds.
2. If the lights stays on after 2.4 seconds, the ABS (ABS/TCS) HU/CM
detects a failure. Follow the troubles ...
How to Use Stitcher™ Radio
What is Stitcher™ Radio?
Stitcher™*1 radio is an application which can be used to listen to Internet radio
or stream podcasts.
Recommended content is automatically selected by registering cont ...
Other materials:
Mazda 6 Owners Manual: Rear side seat belt removal/installation
Caution
The ELR has a spring that will unwind if the retractor's cover is
removed. The spring cannot be rewound by hand. If this occurs, the ELR will
not work properly. Therefore, do not disassemble the retractor.
4SD
1. Fold the rear seat back.
2. Remove the rear side seats.
3. Remo ...
Mazda 6 Owners Manual: Abs (abs/tcs) hu/cm system inspection
System Inspection
Preparation
1. Verify that the battery is fully charged. With the ignition switch on,
verify that the ABS and BRAKE system warning lights goes out after 2.4
seconds.
2. If the lights stays on after 2.4 seconds, the ABS (ABS/TCS) HU/CM
detects a failure. Follow the troubles ...