Mazda 6 manuals

Mazda 6 Owners Manual: Tilt Operation

The rear of the moonroof can be tilted open to provide more ventilation.

To fully tilt automatically, momentarily press the tilt/slide switch.

To fully close automatically, momentarily press the tilt/slide switch in the forward direction.

To stop tilting partway, press the tilt/slide switch.


Moonroof (Some models)
The moonroof can be opened or closed electrically only when the ignition is switched ON. WARNING Do not let passengers stand up or extend part of the body through the open moonroof while the v ...

Slide Operation
To fully open automatically, momentarily press the tilt/slide switch in the backward direction. To fully close automatically, momentarily press the tilt/slide switch in the forward direction. To ...

Other materials:

Mazda 6 Owners Manual: Clock spring inspection
1. Remove the clock spring. 2. Inspect for continuity between the clock spring terminals using an ohmmeter. If not as specified, replace the clock spring. Note When the vehicle-side connector of clock spring is disconnected, the terminals 1A,1B, 1C and 1D are shorted to prevent ...

Mazda 6 Owners Manual: Oil control valve (ocv) inspection
L3 Coil Resistance Inspection 1. Disconnect the negative battery cable. 2. Disconnect the oil control valve connector. 3. Measure the resistance between terminals A and B using an ohmmeter. If not as specified, replace the oil control valve. Specification 6.9-7.9 ohms 4. Connect ...

© 2016-2026 Copyright www.mazda6info.net