Mazda 6 Owners Manual: Seat Belt Warning Systems
If it detects that the occupant seat belt is unfastened, the warning light or beep alerts the occupant.
Refer to Warning/Indicator Lights. Refer to Seat Belt Warning Beep.
Front Shoulder Belt Adjuster
Make sure the adjuster is locked. ...
Front Seat Belt Pretensioner and Load Limiting Systems
For optimum protection, the driver and front passenger seat belts are equipped
with pretensioner and load limiting systems. For both these systems to work properly
you must wear the seat belt prop ...
Other materials:
Mazda 6 Owners Manual: Foreword
When the customer reports a vehicle malfunction, check the malfunction
indicator lamp (MIL), HOLD indicator light flashing, and PCM memory for
diagnostic trouble code (DTC), then diagnose the malfunction according to
following flowchart.
- If the DTC exists, diagnose the applicable ...
Mazda 6 Owners Manual: Abs (abs/tcs) hu/cm inspection
1. Disconnect the negative battery cable.
2. Connect the SST between the ABS (ABS/TCS) HU/CM and harness
connector with the ignition switch off.
3. Attach the tester leads to the SST and inspect voltage referring
the table below.
Terminal Voltage Table (Reference)
(Engine is idling, and co ...