AUTO switch
By pressing the AUTO switch the following functions will be automatically controlled in accordance with the selected set temperature:
NOTE
AUTO switch indicator light
OFF switch
Pressing the OFF switch shuts off the climate control system.
Temperature control dial
This dial controls temperature. Turn it clockwise for hot and counterclockwise for cold.
NOTE
Fan control switch
The fan has seven speeds. The selected speed will be displayed.
Mode selector switch
The desired airflow mode can be selected.
NOTE
A/C switch
Pressing the A/C switch while the AUTO switch is turned on will turn off the airconditioning (cooling/dehumidifying functions).
The air-conditioning can be turned on and off by pressing the A/C switch while the fan control switch is on.
NOTE
Air intake selector
Outside or recirculated air positions can be selected. Press the switch to select outside/ recirculated air positions.
Recirculated air position ()
Outside air is shut off. Use this position when going through tunnels, driving in congested traffic (high engine exhaust areas) or when quick cooling is desired.
Outside air position ()
Outside air is allowed to enter the cabin. Use this mode for ventilation or windshield defrosting.
WARNING
Do not use the
position in cold or rainy
weather:
Using the
position in cold or rainy weather is dangerous as it will cause the windows to fog up. Your vision will be hampered, which could lead to a serious accident.
DUAL switch
Use the DUAL switch to change the mode between the individual operation (driver and passenger) and interconnection (simultaneous) modes.
Individual operation mode (indicator light illuminated)
The set temperature can be controlled individually for the driver and front passenger.
Interconnection mode (indicator light turned off)
The set temperature for the driver and front passenger is controlled simultaneously.
Windshield defroster switch
Press the switch to defrost the windshield and front door windows.
Refer to Windshield Defrosting and Defogging.
Rear window defogger switch
Press the rear window defogger switch to defrost the rear window.
Mazda 6 Owners Manual: Variable intake-air system (vis) control solenoid valve inspection (l3)
1. Remove the VIS control solenoid valve. (See INTAKE-AIR SYSTEM
REMOVAL/INSTALLATION.)
2. Inspect airflow between the ports under the following conditions.
If not as specified, replace the VIS control solenoid valve.
If as specified, carry out the Circuit Open/Short Inspection.
Circ ...
Mazda 6 Owners Manual: Climate control unit removal
1. Disconnect the negative battery cable.
2. Disconnect the air mix and airflow mode wires from each wire clamp and
link. (Manual air conditioner)
3. Remove the center panel. (See CENTER PANEL MODULE REMOVAL/INSTALLATION.)
4. Remove the screws and climate control unit. (Full-auto air conditione ...