Mazda 6 Service Manual: Basic power window system inspection
Manual Mode Function Inspection
Automatic Mode Function Inspection
Automatic Window Return Function Inspection
IG OFF Timer Function Inspection
Two-step Down Function Inspection
- The distance the door glass opens can be changed using the two-step down function. (Approximately 20-100 mm {0.79-3.93 in})
- The two-step down function can be made non-operative. (The function is operative at the initial setting.)
- The two-step down function does not function during IG OFF timer.
Foreword
Always perform basic power window system inspection before
troubleshooting.
Troubleshooting gives content unique to trouble caused by problems in
the automatic window return function.
...
Other materials:
Mazda 6 Service Manual: Rear wiper motor removal/installation
1. Disconnect the negative battery cable.
2. Remove the rear wiper arm and blade. (See REAR WIPER ARM AND BLADE
REMOVAL/INSTALLATION.)
3. Remove the liftgate lower trim. (See LIFTGATE LOWER TRIM
REMOVAL/INSTALLATION)
4. Remove in the order indicated in the table.
5. Install in the revers ...
Mazda 6 Service Manual: Stabilizer control link inspection
1. Remove the stabilizer control link from the vehicle.
2. Inspect for bending and damage.
3. Measure the ball joint starting torque.
(1) Rock the ball joint stud side to side 10 times.
(2) Rotate the ball joint stud 10 times.
(3) Measure the starting torque using a suitable allen so ...